-
Thatch is extremely common throughout New Zealand, and can keep water and air from reaching the soil and, if left untreated, can create an environment that harbours pests and diseases. The Ryan de-thatcher or Power Rake features a rotating de-thatching rake that removes layers of dead grass, roots and debris matted between the soil and the growing grass, keeping the grass greener and healthier while minimizing the chance of disease. The machine has and easy-to-operate height adjustment to allow you to fine-tune the depth from 25mm above the ground to 20mm below. The ergonomic, multi-position handle is designed for different user heights, and it folds for storage and transport.The scarifier has an operating width of 457mm.
-
Our Hansa C27 Chipper delivers great performance while weighing less than 750 kg (to meet towing restrictions). It will chip logs and branches of up to 150 mm diameter, and the auto-feed system removes the need to hand-feed branches into the feed chute, helping speed up the work. Once you’ve tried an autofeed chipper you’ll never go back! This New Zealand designed and built machine is powered by a 26HP Four stroke Honda petrol engine. The Hansa C27 Chipper is fitted with a mandatory feed roller control safety handle, and meets the requirements of the AS/NZS 4024.1:2014 standard. -
Our Baretto 918 machine is a heavy duty self-propelled hydraulic Rotary Hoe. This tiller has counter-rotating tines which break up the most difficult soil, clay or sod. Wheels and tines work independently of each other to allow your travel speed to be adjusted to the soil conditions. The unique swivel handlebar featured on this compact unit means you can walk alongside your tiller rather than in your freshly tilled earth. The rear tine has a decent tilling width of 527mm. The operator-friendly controls are simple to use: there is one handle to set the tine drive and one to adjust the wheel drive. The hydraulic drive is powered by a 9 HP petrol engine and the entire unit weighs 210kg. Hire includes a tilt trailer for easy transport. -
Our Iseki 30 HP Tractor offers versatility with Japanese reliability. The 3-cylinder diesel is sufficient to drive most implements or tow various loads, with traction delivered via the 4WD configuration. Front End Loader work is made easier with intuitive controls and ample hydraulic pressure from the open centre hydraulic system. The Power Take Off (PTO) system runs via an independent clutch and gear system. The shipping weight of the Tractor is a manageable 1500kg, so can transported on a standard excavator trailer. It is also road legal. Hire this Tractor with one of our attachments: 1.5m mower, Rotary Hoe, Level bar or Harrows. -
The Stihl HS 45 Hedge Trimmer is a great option for hedge trimming and garden maintenance. This Hedge Trimmer is powered by a dependable Stihl 27cc 2-stroke motor engine, yet weighs only 4.7kg, so your arms would tire while working. The double-sided reciprocating 450mm blades move at 3800 strokes per minute to create clean, even cuts with precision. -
The Stihl MS261 400mm Chainsaw is a versatile mid-range petrol chainsaw suitable for a wide variety of applications, from cutting firewood, to thinning work and felling medium sized stands. The MS261 model features a 50cc two-stroke engine putting out 4HP of power. Stihl technology in this model also includes improved fuel efficiency, reduced exhaust emissions, a new HD2 long life air filter system, anti-vibration technology and patented captive nuts on the chain sprocket cover. All Chainsaws are provided with a sharpened chain and basic PPE. -
The Husqvarna 556 Chainsaw has been developed for demanding work for both contractors and land owners. The saw features a 4.2HP 60cc two-stroke motor and a 450mm bar. The combination of Husqvarna technology with smart design has resulted in a reliable efficient chainsaw that weighs only 5.8kg. All Chainsaws are provided with a sharpened chain and basic PPE. -
Our Scotts broadcast spreader on wheels is designed to provide an even application of lawn fertiliser. The opening of the hopper is controlled by a lever on the handle. The spreader distributes the fertiliser from the hopper on to a rotating disc that moves as the wheels turn. Suitable for spreading most lawn fertilisers. -
Our Husqvarna lawn mowers are commercial quality, with a large 48cm (19”) alloy cutting deck plus a powerful DOV IC series four stroke engine and four cutting blades to give a superior cut and finish to your lawn. This commercial machine is fitted with features such as large dual ball bearing wheels, comfort grip folding handles with quick action cam locks, safety zone starting, large plastic catcher and eight cutting heights. It’s a delight to mow lawns with this machine. -
Our Fieldmaster PTO driven mower is ideal for larger lifestyle blocks and farms. The heavy construction makes it well suited to difficult pasture and terrain. Best suited to tractors with 35-80 HP or hire our Tractor -
Our Honda PHB Post Hole Borer is powered by the ultra-lightweight, reliable GX35 Mini 4-Stroke engine to deliver auger speeds of 160-200rpm. At only 10.5kg (excluding the auger) it's the ideal weight for manoeuvring in tight spaces and easily transporting from job to job. Hire includes a 150mm or 200 mm auger. -
Our Maxim 5.5HP Front Tine Tiller is designed for hard work. The tines are belt-powered powered by a GX160 Honda petrol engine and a durable transmission. Perfect for rejuvenating domestic gardens or preparing new lawn bases for seeding. -
Predator 13HP Stump Grinder
Our Predator Stump Grinder is designed to remove stumps of up to 300mm diameter. It will operate on stubborn stumps up to 200 mm above ground and 120 mm below ground The machine is powered by a Honda GX390 13HP 4 stroke engine and the unit weighs approximately 145 kg. The Predator Stump Grinder is fitted with a wheel brakes and a pivoting base, so you can swing the cutting head over the stump and quickly remove it. Hire includes reasonable wear and tear of the teeth. Please note that any teeth broken by cutting into rock will be an additional charge. -
Our Auger Torque Excavator Augers are designed for drilling numerous post holes with the minimum of effort. The Auger Torque 1500 is the ideal accompaniment to our Kobelco 1.7 MT excavators. The Earth Drill 1500 features a robust efficient hydraulic motor capable of running at up to 205 Bar pressure. Torque is amplified by using the unique Auger Torque planetary gearbox, guaranteeing efficiency and reliability and up to 1496 Nm of torque. The non-dislodgement shaft design guarantees that the shaft will never fall out, making for a safer work environment for workers within the work zone, not only for the operator but also any surrounding workers. Depending on soil type this unit will dig holes of up to 300mm diameter. Select an auger from our range of 50mm, 250mm and 300mm augers (additional hire cost applies).
