Floats, Trowels, Screeds, Bar Benders, Drills.
-
Our Hilti TE7 Rotary Hammer Drill is designed to delivery hammer drilling, rotary-only drilling and chiselling. Tipping the scales at 3.4 kg, this 720W drill combines power with ease of handling. The three working modes of Hammer drilling, drilling only, and Chiselling permit and number of different projects to be completed with just one tool. The Hammer Drilling functions handles holes of 4 - 28 mm diameter. This Rotary Hammer Drill delviers a single impact energy of 2.6J but a full hammering frequency of 4020 impacts per minute and at 740 RPM. The Hilti TE7 is superb for drilling and hammer drilling in concrete and masonry, corrective chiselling and small channel openings in concrete and occasional drilling in wood and steel.
-
Our Power Floats or Trowelling machines have four blades, with a reliable 5HP Honda 4-stroke motor to power them. The overall width is 40 inches. The blades can be manually adjusted, or the pitch of all blades easily varied during trowelling by simply using the blade arm tilt control. The power float or ‘Kelly float’ is equipped with adjustable wide handles to provide optimal control and comfort. Perfect for trowelling off large areas of concrete and slabs to bring out the desired finish.
-
Our Husqvarna Masonry or Paver Saw uses a high speed 2.7KW motor to give clean accurate cuts on pavers and concrete masonry. The fixed blade, sliding table and integrated raceways make cutting easy, while dust can be controlled with the water jet. The frame is sturdy and rigid, and will fold down for easy transport.
-
The MasterVibe Petrol concrete vibrator is perfect for ensuring even spread of concrete in confined areas such as tight boxing and concrete block backfilling. The Honda GX35 1.5HP four stroke motor is easy to operate and fuel efficient and is complimented with a 45mm bulb or ‘spud’. This unit is light and portable, and perfect for outdoor concrete work, especially where mains electricity isn’t readily available.
-
The Hilti DG 150 Diamond Grinder is a universal grinding tool suitable for the removal of materials such as Concrete, Coatings, Adhesive, Epoxy, Cement. It can also be used for the levelling and roughening of concrete as well as the removal of old paint, coating and adhesives. The 240V motor drives a 150mm grinding disc. This machine is fitted with the Hilti Quick Stop feature, ensuring the cup wheel stops spinning within two seconds after releasing the trigger.
-
Our Rio Steel Cutter and Bender is designed for the cutting and bending of reinforcing rods for all concrete reinforcing. It will cut and bend up to 15 mm mild steel (Not suitable for high tensile steel) and can be used for bending reinforcing rods from 90 degrees or 135-180 degrees. Length is 1320mm and it weighs 19kg.